Viewing Registration Status

The Registration Status page displays registration status of the following:

Registration status mode of the device. This displays if you have configured single registration and authentication for the entire device (i.e., 'Registration Mode' [AuthenticationMode] parameter set to Per Gateway).
Registration status of SIP Accounts, which are configured in the Accounts table (see Configuring Registration Accounts).
To view registration status:
Open the Registration Status page (Monitor menu > Monitor tab > VoIP Status folder > Registration Status).

Registration Status Page Description

Parameter

Description

'Registered Per Gateway'

Displays the registration status of the device:

"Yes"
"No"

Note: The parameter is applicable only to the Gateway application.

Accounts Registration Status table

Displays the registration status per Account.

'Group Type'

Displays the row index number of the Served Trunk Group or IP Group.

'Group Name'

Displays the name of the Served Trunk Group or IP Group (if applicable).

'Server Address'

Displays the address (IP address and port) of the registrar server (Proxy Set of Serving IP Group) to which the Account is registered.

'Status'

Displays the Account's registration status:

"Registered"
"Not Registered"

Phone Numbers Status table

Displays the registration status of FXS endpoints.

'Phone Number'

Displays the phone number of the endpoint.

'Gateway Port'

Displays the port number of the endpoint.

'Status'

Displays the registration status of the endpoint:

"Registered"
"Not Registered"